2-4
Indmar Marine Engines
3. Verify engine drain plugs are in place.
4. Check engine oil level with the dipstick.
Figure 2.2 – Engine Oil Dipstick
5. Verify fuel lines are tight and there is no leakage
present.
6. Inspect oil lines and oil filter. Ensure they are tight
and no leakage is present.
Figure 2.3 – Engine Oil Filter
7. Check transmission fluid level. Check V-Drive fluid
level if equipped.
8. If your engine is equipped with a fresh water cooling
system, check coolant level in the expansion tank.
9. Check alternator belt for wear and proper tension.
10. Verify that exhaust hoses are in good condition and
clamped tight.
11. Ensure that the propeller shaft coupler bolts are tight.
12. Verify engine mounts are tight.
INDM-B001
To Next Page
Loading...
Need help?
General