CE Declaration of Conformity
sh. 22 of 26
6 CE Declaration of Conformity
This device complies with the requirements of the EC Directives
89/336/EEC " Electromagnetic Compatibility " (EMC directive).
• Emission: EN 61000-6-2 Generic Emission Standard
(industrial environments)
EN 55022 Class A (ITE Product Standard)
EN 55011 Group 1 Class A (ISM Product
Standard)
• Immunity: EN 61000-6-2 Generic Immunity Standard
(industrial environments)
A Declaration of Conformity in compliance with the above
standards has been made and can be inspected at Softing on
request.
NOTE:
• For compliance with the legal EMC requirements, the other
components (AC adapter, etc.) must also meet these
requirements.
• To meet the EMC conditions, the device must be installed and
connected in accordance with the Installation Instructions.
Warning!
This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required
to take adequate measures.
To Next Page
Loading...