64
Starting-up
• Start up / switch off the hob:
Action Control panel Display
To start press key [ 0/I ] [ 0 ]
To stop press key [ 0/I ] nothing or [ H ]
• Start up / switch off a heating zone:
Action Control panel Display
To set slide on the “SLIDER“ [ 1 ] to [ P ]
(adjust the power) to the right or to the left
To stop slide to [ 0 ] on “SLIDER“ [ 0 ] or [ H ]
If no action is taken within 20 seconds ,the electronics return in waiting position.
Pan detection
Pan detection ensures a perfect safety. Induction does not work:
• If there is no pan on the heating zone, or if this pan is not adapted to induction. In this case
it is impossible to increase the power and the display shows [ U ]. This symbol disappears
when an induction pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: do not let the pan detection [ U ] active.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and the symbol [ H ] indicates this on the display.
The symbol [ H ] disappears when the heating zones can be touched without danger.
Do not touch the heating zones and do not put any heat sensitive objects on them, as long as the
residual heat indicators are switched on. There are risks of burns and fire.
Booster and Double Booster function
Booster [ P ] and Double Booster [ ] grant a boost to the selected heating zone.
When this function is activated, the heating zones work during 10 minutes at an ultra- high speed.
This is meant to be used for heating up big quantities of water very quickly (for e.g. pasta).
• Start up / Stop the Power:
Action Control panel Display
Start up the Booster Slide to the end of the “SLIDER” [ P ]
Or press directly on the end of
the “SLIDER”
Stop the Booster Slide on the “SLIDER“ [ 9 ] to [ 0 ]
• Start up / Stop Super Power:
Action Control panel Display
Start up Booster Slide to the end of the “SLIDER” [ P ]
Or press directly on the end of
the “SLIDER”
Start up Double Booster Re-press key [ + ] [
and P ]
Stop Double Booster Slide on the “SLIDER“ [ P ] to [ 0 ]
Stop Booster Slide on the “SLIDER“ [ 9 ] to [ 0 ]
To Next Page
Loading...