Industrial Shields M-DUINO PLUS series - Connector Details

Ref. IS.MDUINO.XXX
Connector details:
The connector inside the PLCs that mounts on the PCB is MC 0,5/10-G-2,5 THT – 1963502
from Phoenix contact. MC0,5/10-G-2,5THT
For I/O and power supply there is a FK-MC 0,5/10-ST-2,5 - 1881406 connector from Phoenix
contact. FK-MC 0,5/10-ST-2,5
Connection details:
Article reference
MC 0,5/10-G-2,5 THT
Height
8,1mm
Pitch
2,5mm
Dimension
22,5mm
Pin dimensions
0,8x0,8mm
Pin spacing
2,50mm
Article reference
FK-MC 0,5/10-ST-2,5
Rigid conduit section min.
0,14 mm²
Rigid conduit section max.
0,5 mm²
Flexible conduit section min.
0,14 mm²
Flexible conduit section max.
0,5 mm²
Conduit section AWG/kcmil min.
26
Conduit section AWG/kcmil max.
20