2
Declaration of Conformity
This is to certify that this equipment, designed and manufactured by:
INFICON Inc.
2 Technology Place
East Syracuse, NY 13057
USA
meets the essential safety requirements of the European Union and
is placed on the market accordingly. It has been constructed in
accordance with good engineering practice in safety matters in
force in the Community and does not endanger the safety of
persons, domestic animals or property when properly installed and
maintained and used in applications for which it was made.
Equipment Description:
D-TEK Refrigerant Leak Detector
Applicable Directives:
73/23/EEC as amended by 93/68/EEC
89/336/EEC as amended by 93/68/EEC
Applicable Standards:
EN 61010-1 : 1993
EN50081-1 : 1992
EN50082-1 : 1992
CE Implementation Date:
January 3, 1995
Authorized
Representative:
Gary W. Lewis
Vice President-Quality Assurance
INFICON Inc.
ANY QUESTIONS RELATIVE TO THIS DECLARATION OR TO THE SAFETY OF INFICON’S PRODUCTS SHOULD BE
DIRECTED, IN WRITING, TO THE QUALITY ASSURANCE DEPARTMENT AT THE ABOVE ADDRESS.
THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE
ACCOMPANYING THE INSTRUMENT.
To Next Page
Loading...
Need help?
General
