Why is my Inficon Gas Detectors unit having poor sensitivity?
If your Inficon Gas Detectors unit powers up but struggles to detect combustible gas, it might be due to the unit being set to low sensitivity. Try increasing the sensitivity by dragging your finger upwards on the touch pad. Alternatively, the sensor may be worn out and require replacement.
What to do if the alarm sounds continuously on Inficon Gas Detectors?
If the alarm on your Inficon Gas Detectors sounds continuously, even after a warm-up period, there could be a couple of reasons: * The sensor might not be installed properly or is missing. Ensure the sensor leads are straight and correctly inserted into the holes at the base of the sensor socket, and that the orientation tab is properly aligned in the probe tip. * The sensor may be worn out and needs replacement.
How to fix Inficon Gas Detectors that will not power up?
If your Inficon Gas Detectors unit won't power up, it could be due to worn-out batteries, in which case you should replace them. Another possibility is that the batteries are improperly installed. Please refer to Figure 1 for proper installation.
General| Brand | Inficon |
|---|---|
| Model | GAS-Mate |
| Category | Security Sensors |
| Language | English |
To Next Page
