4
Specifications
Sensitivity . . . . . . . . . . . . . . . . . 5 PPM Methane (main component of natural gas)
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Two "D" cell alkaline batteries
Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Approximately 25 hours
Weight (with power cells) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 lb (0.7 kg)
Product Warnings
To prevent ignition of a hazardous atmosphere, batteries must only
be changed in an area known to be nonhazardous (i.e., completely
free of combustible gas).
Use only Duracell® MN1300 batteries to maintain intrinsically safe
approval.
Always check instrument operation with a known combustible leak
source before use.
The GAS-Mate will detect leaks as described below but may not
indicate when a hazardous atmosphere is present due to its Auto
Zeroing function. Lack of a reading by the GAS-Mate should not be
taken as an indication that the atmosphere is totally safe.
There are no user serviceable parts inside. Do not disassemble the
GAS-Mate.
To Next Page
Loading...
Need help?
General
