• After launching the Radar GUI application, the compatibility of the firmware version running in your 24 GHz
radar-connected device is checked. If a newer firmware version is available, a prompt to follow the links to
update the firmware appears.
Figure 14 New firmware version available window
• Radar GUI automatically starts acquiring data from the 24 GHz radar board, when the radar firmware is
running. Figure 15 shows the Radar GUI default screen acquiring FMCW data from DEMO POSITION2GO radar
board, in which the Frequency Domain view displays the spectrum data for each antenna.
• For further information, please refer to the integrated Radar GUI help, which provides a complete overview
of all features.
To Next Page
Loading...
