24 GHz radar tools and development environment
XENSIV™ 24 GHz radar demo boards
3 Customizing radar applications
• Check successful build in the Console window, where the build result details are displayed.
Figure 28 DAVE™ console
• Ensure that the debugger of the 24 GHz radar board is connected to the PC via USB “type A to micro-B” cable
through the USB connector (e.g., X12 connector for DEMO POSITION2GO board).
• Set debug configurations by clicking on the drop-down menu of the Debug toolbar button (bug icon) and
selecting Debug Configurations… as shown in Figure 29. Alternatively, press key F11 to directly start the
debug session.
Figure 29 Start debug session toolbar button
If opening Debug Configurations, a window as shown in Figure 30 appears.
• Double-click on GDB SEGGER J-Link Debugging to create a new debug configuration.
• Click on the Debug button to Flash and start a debug session.
To Next Page
Loading...
