Infineon XMC4700 - Using Pulsed Doppler Radar Library

12 of 31
2019-12-02
Using Infineon’s radar baseboard XMC4700 and BGT24LTR11 radar
shield with Arduino
Set-up guide
Software set-up
3.3 Using Pulsed Doppler Radar Library
The Pulsed Doppler Radar Library is installed as part of the core libraries for XMC when the XMC Arduino
package is installed as shown in Section 3.2.
1. To use the Pulsed Doppler Radar Library in Arduino sketch, it must first be added via Sketch > Include Library
> IFXRadarPulsedDoppler (Figure 11).
Figure 11 Including and using the Library in Arduino sketch
2. Next, declare a Radar Pulsed Doppler object, such as shown in Figure 12.
Figure 12 Declaring Pulsed Doppler Radar object