Description – Overview on propagating the
sync0 and sync1 signals to ISR
ECAT_SSC0
EVENT_GENERATOR
EVENT_DETECTOR
INTERRUPT(sync0)
sync_out_0
sync_out_1
signal_b trigger_out
EVENT_DETECTOR
signal_a
trigger_out
trigger_in iout
EVENT_GENERATOR
trigger_in iout
sr_irq
INTERRUPT(sync1)
sr_irq
EVENT_DETECTOR and EVENT_GENERATOR APPs are instances of the
event request unit (ERU) peripheral. Inside this example the ERU is
used to propagate the signals sync0 and sync1 to the interrupt service
routines.
Please see next slides how to setup this configuration inside DAVE™.
ATTENTION: With the same approach sync0 and sync1 signals can
also be connected to other resources. For example: ADC, ports and
timers.
30
Copyright © Infineon Technologies AG 2016. All rights reserved.
To Next Page
Loading...
