Infineon XMC4800 - Setting Slave Outputs on Master (2;2)

How to test – Setting slave outputs on master
(2/2)
ACTION
1. Right click on OUT_GEN_INT1 of the slave node and select „Online
Write…“ inside the context menu. Change the value from 0 to 50000.
OBSERVATION
1. Brightness of LED2 on „XMC4800 Relax EtherCAT Kit“ is dimmed.
The OUT_GEN_INT1 value sets the brightness of LED 2. The lower the
value the brighter the LED2. To turn off LED2 just set value to max
(65535).
60
Copyright © Infineon Technologies AG 2016. All rights reserved.