Page 13
3. Water temperature control
⑴ Turn the water flow regulating knob to control the water flow and its
temperature.
⑵ Turn the gas regulating knob to control the flame of the burner thus controlling
the hot water temperature.
⑶ Turn off the hot-water outlet valve and the appliance will stop working
automatically.
Test water temperature with your hand before shower, so as to avoid scalding
(Fig.9).
Turn off the gas valve after each shower (Fig.10).
Cautions for Safety
■ Gas leakage prevention
Forbid any interference with a sealed component.
● It is better to install a gas/flue gas sensor.
● Check whether the flame is extinguished after each shower and do not forget to
turn off the gas valve (Fig.10)
● Periodically (like annually) check all the gas pipe connections with soapsuds to
see whether there is any gas leakage.
● Gas pipe ages and impacts sealing, and it’s recommended to have the gas pipes
replaced yearly.
● In case of gas leakage, please shut off the gas supply and open the windows
immediately and gently. Actions such as ignition, switching on/off the electric
power are strictly prohibited to avoid explosion and fire (Fig.11).
To Next Page
Loading...
