26
Description of the treadmill folding function
1. Press the gear adjustment function on the treadmill to place it in a high incline gear.
2. Loosen the large knob (6) and small knob (5) as shown in the instructions, and fold down the left
and right column tubes as shown in the diagram. Perform this operation on both sides.
3. Screw the large knob (6) into the limiting hole, as shown in the middle picture, and perform this
operation on both sides.
4. Press the icon below to lift the treadmill completely and place it upright on the ground; then move
the folded treadmill to a safe place against a wall and away from children!
**Instructions for moving the treadmill:**
1. After folding the treadmill, secure one side of the base with your feet and pull the armrest back with
both hands to tilt the entire machine backward.
2. Please note that after folding the treadmill, you should move it to a place where children cannot
easily reach it. This is to prevent injuries to children, as the treadmill may fall and cause injury.
To Next Page
Loading...