EasyManua.ls Logo

Infinity 54000 - User Manual

Infinity 54000
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Copyright ©2021 Emerald Supply, Inc. All rights reserved. Publisher reserves the right to make dimension or
specification changes, or deletions, consistent with design trends, product improvements, or for reasons
beyond our control. Publisher makes no warranties with respect to the accuracy or completeness of the
contents of this manual.
Long-Term Care Low Profile Bed
Model 54000
User Manual
DEALERS: This manual MUST be given to the user of the bed.
USER: Before using this bed, read this manual and save for future reference.

Table of Contents

Questions and Answers

  • D
    David HaysAug 12, 2025
    What to do if Infinity Medical Equipment bed is idle when pressing hand pendant buttons?
    • T
      twelchAug 13, 2025
      If your Infinity Medical Equipment bed is idle when you press the hand pendant buttons, several factors could be at play. First, check if other buttons are working to rule out maximum or minimum position issues. Ensure the power cord is properly connected to both the electrical socket and the bed. Also, verify that all connectors to the control box are tightly connected. The load might be too heavy, so ensure the weight is within the designated capacity and reduce it if necessary. Finally, the control system might need a reset, which you can do using the hand pendant.
  • J
    Julie MillerAug 20, 2025
    Why is my Infinity 54000 Medical Equipment actuator making unusual noise?
    • B
      Brandon OsbornAug 20, 2025
      An unusual noise from the actuator of your Infinity Medical Equipment may indicate that the actuator is worn, damaged, or the spindle is bent. The suggested solution is to replace the actuator.
  • M
    Mary BerryAug 27, 2025
    How to fix a noisy pivot sound on Infinity 54000?
    • M
      Mark CooperAug 27, 2025
      If you notice a noisy or dry sound coming from the pivots of your Infinity Medical Equipment, it likely needs lubrication. Lubricate your bed to resolve this issue.
  • W
    William BarnettSep 3, 2025
    What to do if Infinity 54000 Medical Equipment casters or brakes are noisy or stiff?
    • T
      Tiffany NolanSep 3, 2025
      If the casters or brakes on your Infinity Medical Equipment are noisy or stiff, this is often due to debris or fluff in the bearings. The suggested solution is to replace casters.

Infinity 54000 Specifications

General IconGeneral
Accuracy± 5%
TypeVolumetric Infusion Pump
Infusion Rate0.1 to 1200 mL/h
Volume to be Infused1 to 9999 mL
Bolus Rate1 to 1200 mL/h
Power Supply100 - 240 VAC, 50/60 Hz
BatteryRechargeable Lithium-Ion battery
Weight3.5 kg
DisplayLCD
AlarmsOcclusion, air-in-line, low battery, infusion complete