Assembling the Bed
Assembling the head/foot board brackets to the bed
1. With the bed raised to its highest position, step on the locking levers to lock the
casters on at the foot end of the bed.
2. Turn and loosen the two black turn knobs on the underside of the bed assembly
insertion slots on the head side of the bed.
3. Slide and push the headboard brackets all the way into the slots. Tighten the black
knob to secure the brackets in place.
4. Repeat the same procedure for the footboard bracket installation.
Assembling the head/footboard
1. With the mounting plates on the headboard facing the bed, slide the mounting
plate groove onto the headboard mounting bracket’s vertical support.
2. Insert the lock pin through the mounting plate into the headboard to secure the
headboard in place. Repeat on the other mounting plate.
3. Repeat the same procedure for footboard installation.
To Next Page
Loading...