Infinity Chimp 300 - 15 Record Cuelists; Record a Cuelist to a Master; Assign a Cuelist to a Master Using the Cuelist Pool Window; Start; Stop Cuelists Using the Masters

34
Series
Productomschrijving
15 Record Cuelists
Cuelists are the backbone of your programming and show. They may contain one or more cues,
whereas each cue might have a different fade and wait time applied.
Faders, Executors and Virtual Executors all rely on Cuelists.
Record a Cuelist to a Master
After setting up a look, press the [Rec] -key followed by the either a faders [Go], [Pause/Back] or an [Exec] -
key Or just select a virtual Executor from an Executor Split Widget.
If you store a Cuelist that way, it will be stored to the next free spot in the Cuelist Pool and will be
automatically assigned to the selected Fader or Executor.
To record a second Cue into that same cuelist, repeat the steps above, selecting the same Fader or
Executor as the target.
Assign a Cuelist to a Master using the Cuelist Pool Window
To assign a Cuelist you previously recorded to a Master, press [Link]” –key and press either a faders [Go],
[Pause/Back] or an [Exec] -key or just select a virtual Executor from an Executor Split Widget.
The Cuelist Pool will be shown. Select the Cuelist on the screen.
Start / Stop Cuelists using the Masters
To start a Cuelist assigned to a Fader, press the [Go] –key above the fader or the appropriate [Exec]
button.
To stop it, hit the [Off] –key followed by either the masters [Go], [Pause/Back] or an [Exec] -key.