16
5. INFLATION VALVES
5.2 CHILDSEAT VALVES
1
The childseat incorporates two types of valve. A twist valve
(identical to the inflatable seats) is used to inflate the seat pad
section. Inflate using the same method as the inflatable seats.
2 A second type of valve is used to inflate the backrest section
of the childseat. This is a non-return valve and is inflated with the
appropriate nozzle.
3 Once the childseat is inflated, check all valves are tightly
closed.
NOTICE -
All valves are shipped loose and need tightening
before inflation.
CAUTION - ENSURE VALVES REMAIN TIGHT WHEN
REMOVING PUMP NOZZLES.
Twist valve
Non-return
valve
Backrest section
Seat pad section
Pump nozzle
for non-return
valve
Outside Diameter = 5mm
or 3/16”
!
To Next Page
Loading...