Infinity Odyssey 375 - Repairing Pinholes; Repairing Larger Holes

32
9.2 REPAIRING PINHOLES
To repair pinhole punctures, locate the hole and work in a drop
of adhesive. Allow the glue to cure for 30 mins before inflating.
9.3 REPAIRING LARGER HOLES
To repair larger holes or small tears, follow these steps:
1 Wear protective gloves when using glue (not included).
2 Remove any moisture and dirt from around the puncture.
3 Rub sandpaper around damaged area to roughen surface for
good adhesion.
4 Use the light grey repair patch that matches the chamber
fabric to cover the hole. Trim patch to 3cm (1
1/4”) beyond
damaged area and round off any corners.
9. REPAIR INSTRUCTIONS
Repair Kit
contents
Repair patches
Repair Kit
contents