33
9. REPAIR INSTRUCTIONS
5 Lightly coat both the patch and damaged chamber area with
adhesive.
6 Leave the glue for approximately 3 minutes until tacky before
centering the patch over the damaged area and pressing it
gently into place, smoothing out any bubbles or wrinkles.
Allow the patch to cure for a minimum of 30 mins before inflating
again.
9.4 REPLACING INFLATABLE CHAMBERS
Removing Odyssey 375 and Odyssey 295 side chamber:
1 Ensure the kayak is fully deflated.
Wait until glue is
dry - 30 mins
Wait until glue is
tacky - 3 mins
INFINITY
Side chamber
Side chamber
Front Back
To Next Page
Loading...