Infinity Odyssey 375 - 6 Getting Started; Inflating Your Kayak

17
6. GETTING STARTED
6.1 INFLATING YOUR KAYAK
1 Remove the kayak from its storage bag and unfold it on a
clean surface free of sharp objects.
2 Before inflating the kayak, ensure all inflation valves are
aligned with the holes in the outer fabric shell. Each valve should
be positioned in the centre of the hole with an even gap around
it before and after inflation.
NOTICE – It is easier to centre the valve while the kayak is
partially inflated.
Fabric
Gap
Gap
Valve
Odyssey 375 and Odyssey 295
inflation valves - 3 at rear
Orbit 245 inflation valves
- 2 at front, 1 at rear
Front FrontBack Back
INFINITY
INFINITY
INFINITY
INFINITY