Infinity Odyssey 375 - Fitting Seats and Footrest

21
6.4 FITTING SEATS AND FOOTREST
Odyssey 375 and Odyssey 295 seats and footrests:
1 To inflate the seat, unscrew the valve and push the pump
nozzle tightly into the valve end, holding while inflating.
2 To inflate, open (unscrew) the twist valve and push the nozzle
firmly into the valve, holding while inflating.
3 When inflated, close (screw tight) the twist valve and remove
nozzle.
NOTICE - The height and firmness of the seats can be adjusted
by adding or removing air to achieve the desired result. This
should be done before getting on the water.
6. GETTING STARTED
Twist valve
Adult inflatable
seat
Pump nozzle
for twist valve
Outside Diameter = 10mm
or 3/8”