42
2 Gently push the chamber into the opening taking time to
position it correctly and ensure there are no folds and it is
correctly aligned.
3 After replacing the chamber, fully close the zip and ensure the
valves are aligned with the holes in the fabric shell.
4 Partially inflate and check the alignment. If it needs
adjustment, partially deflate, adjust and repeat the process. It
may take a little time to correctly reposition the chamber.
Replacing Orbit 245 floor chamber:
1 Before replacing, ensure the chamber is oriented the correct
way with the valve at the front of the kayak.
9. REPAIR INSTRUCTIONS
INFINITY INFINITY
Ensure chamber is oriented so valve is at rear
Front
Front
Back
Back
To Next Page
Loading...