Infinity Pedicure Spa - User Manual

Pioneering “Smart” Pedi-Spas
PEDI
CURE SPA USER MANUAL
INFINITY
™
Before Operating the unit, please read this manual thoroughly and retain it for future reference.
RECEIVING AND INSPECTION:
TR
ADEMARK DISCLAIMER
In
finity, Sani-Drain, PureFlo, Pioneering “SMART” Pedi-Spa, Auto-Fill, AutoClean, and Tru-Touch are the registered trademarks of Lexor, Inc.
Reproduction or reuse of part or all of trademarks are expressly prohibited without written permission from Lexor, Inc. Due to limitation of the printing
process, product colors shown might look different from actual colors. Lexor will not be responsible for any misprint of this advertisement. Lexor’s footspa
specification and prices may change without prior notice. Pedicure Spas are intended for professional used only, always follow your State Board’s sanitation
and disinfectant guideline.
Design and Specifications are subject to change without notice
PLEASE TAKE NOTE! Thoroughly inspect each shipment immediately upon arrival. It is
important that you notify the driver and insist on a notation of the damage. Make this
notation directly on the freight company’s waybill or bill of lading. Failure to note damage on
the waybill or bill of lading may impede and/or prevent any claims that you may have
against the freight carrier.
If
missing parts or damage is found. Please notify the carrier at once and request an
inspection. DO NOT DISCARD THE SHIPPING BOX. If you give the carrier a clear receipt
for goods that have been damaged in transit, you do so at your own risk and expense.

Summary

Receiving and Inspection

Safety Precautions

General Safety Warnings

General warnings for safe operation and usage of the pedicure spa.

State-Specific Notices

Notice regarding state-specific requirements and plumbing codes for pedicure spas.

Parts

Identifying INFINITY Model Parts

Visual guide to identify all components of the INFINITY™ pedicure spa model.

Installation

Clearance Requirements

Unit placement and spa-to-spa spacing guidelines.

Manicure Tray and Armrest Installation

Instructions for attaching manicure tray and armrest.

Back Rest Adjustment

How to adjust and set the backrest position.

Plumbing Connections and Power Drain Setup

Precautions, guidelines, and power drain connection.

Gravity Drain Setup

Instructions for setting up the gravity drain system.

Power Drain Flow Pattern

Illustrates the plumbing flow pattern for the power drain.

Gravity Drain Flow & Water Lines

Illustrates gravity drain flow and water supply line connection guidelines.

Drain Connection Methods

Recommendations for connecting drains according to local codes.

Spa Specification

Operation and Care

Auto-Fill Operation

Operating instructions for the Auto-Fill™ water filling system.

Manual Operation Modes

Manual control of water fill, jets, and drainage functions.

Auto-Fill & Auto-Drain with DAS

Operation for models with Auto-Fill, Auto-Drain, and Digital Automated System.

DAS Front Panel Controls

Functional and operating instructions for the Digital Automated System panel.

Jet Cover Maintenance

Procedure for removing and installing the jet cover.

Jet Housing Maintenance

Procedure for removing and installing the jet housing.

Massage System Operation

Operation of the massage system using the remote controller.

Massage Chair Component Installation

Basic installation instructions for the massage chair component.

Cleaning and Safety Requirements

Safety guidelines and detailed cleaning procedures required by state boards.

Warranty

Infinity Pedicure Spa Specifications

General

Brand	Infinity
Model	Pedicure Spa
Category	Pedicure Spa
Language	English