Model SR-WDN620SD / SR-WDN620SA
SR-TWDN620SD / SR-TWDN620SA
Power Source DC12V/AC24V; AC230V;
DC12V/AC24V; AC230V
Image Sensor 1/3” Sony Super HAD II (ICX638/639BK)
Total Pixel NTSC : 811(H) X 508(V), PAL : 795(H) X
596(V)
Effective Pixel NTSC : 768(H) X 494(V), PAL : 752(H) X
582(V)
Scanning System 2 : 1 Interlace
Synchronization Internal / Line Lock
H. Resolution 620 TVL
Min. Illumination 0.05Lux (Color ,50IRE@F.1.2),
0. 0001Lux(Sens-Up:Auto:X512
S/N Ratio 52dB (AGC Off, Weight Off)
OSD BUILT - IN
AGC Off / Low / Middle / High
Shutter OFF / A.FLK / 1/160~1/90000 / X512 ~ X2 /
AUTO Selectable
Sens-up OFF / AUTO (X2~X512)
Day / Night DAY / NIGHT / AUTO / ISC Selectable
WDR On/ Off Level Adjustable, More than 72dB
with Dual Channel Operation
BLC On / Off (Level Adjustable)
ECLPS High Light Compensation, Area selectable,
Level Adjustable
White Balance ATW / COLOR-ROL / AWC-SET / MANUAL
(Color Temp. 1500K~11000K)
3D-DNR ON / OFF Level Adjustable (2D+3D Filtering
System)
Effects DZoom / Image Freeze / D-Effect / Color /
Contrast / Sharpness/CR_CB Gain
Motion Detection ON / OFF (8 Programmable Zone)
Privacy Masking ON / OFF (8 Programmable Zone)
Stabilizer ON / OFF (Digital Image Stabilizer)
Miscellaneous L/L, Monitor Type, Multi-Languages Select-
able
Operating Temp. -10°C to +50°C / 30% to 80% RH
Storing Temp. -20°C to +60°C / 30% to 80% RH
SPECIFICATION
1. SPECIFICATION
WARNING & CAUTION
CAUTION
To reduce the risk of Electric Shock, do not remove cover (or Back).
No user serviceable parts inside refer servicing to qualified service
personnel.
The lighting flash with an arrowhead symbol in an equilateral triangle,
is intended to alert the user to the presence of un-insulated “ Danger-
ous Voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(serving) instructions in the literature accompanying the appliance.
INFORMATION
This equipment has been tested and found to company with limits for a class a digital device
Pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference When
the equipments operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and if not installed and
used in accordance with the instruction manual, may Cause Harmful interference to radio com-
munications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own Expense..
WARNING
Change or modification not expressly approved by the manufacturer could void the user’s author-
ity to operate the equipment.
CAUTION
To prevent electric shock and risk of fire hazards.
Do not use Power Sources other than that specified.
Do not expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should confirm to all
local codes.
!
CAOTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
ENG
2. WARNING & CAUTION
To Next Page
Loading...