Need help?Do you have a question about the Infinix X698 and is the answer not in the manual?
Details Specific Absorption Rate (SAR) limits, testing, and compliance with RF exposure guidelines.
Provides guidelines for safe usage when the phone is worn on the body, specifying separation distances.
The Infinix X698 is a mobile phone designed for general use, offering a range of features for communication, entertainment, and productivity. Its design incorporates a modern aesthetic with a focus on user interaction through its physical buttons and display.
The primary function of the Infinix X698 is to serve as a personal communication device, enabling users to make and receive calls, send and receive messages, and connect to the internet. It supports the use of SIM cards for cellular network connectivity and an SD card for expanded storage, allowing users to store a significant amount of data, including photos, videos, and applications.
The device features a front camera for selfies and video calls, as well as multiple rear cameras for capturing high-quality photographs and videos. These cameras are designed to cater to various photographic needs, from wide-angle shots to detailed close-ups. The phone also includes a flash lens to assist with photography in low-light conditions.
For audio output, the Infinix X698 is equipped with a main speaker (SPK) and an upper speaker (UP SPK), providing sound for calls, media playback, and notifications. An earphone rubber component suggests support for wired headphones, allowing for private listening.
The phone's internal components are carefully arranged, as shown in the explosion diagram, to ensure optimal performance and functionality. Key components include the main PCBA (Printed Circuit Board Assembly) and a sub PCBA, which house the device's processing unit, memory, and other essential electronic circuits. A motor linear component indicates the presence of a vibration motor for haptic feedback and alerts.
Connectivity options are robust, with a coaxial cable likely facilitating antenna connections for strong signal reception. The device also supports USB connectivity for charging and data transfer, allowing users to connect it to a computer for file management or to charge the battery using a compatible charger.
Operating the Infinix X698 is designed to be intuitive. The phone is powered on and off using the power key, which also integrates a side fingerprint sensor for secure and convenient unlocking. This biometric security feature enhances user privacy and quick access to the device.
Volume control is managed through dedicated volume up (+) and volume down (-) keys, allowing users to adjust audio levels for calls, media, and alarms with ease.
The display, identified as CTP+LCM (Capacitive Touch Panel + Liquid Crystal Module), serves as the primary interface for interacting with the Android™ operating system. This touch-sensitive screen allows for navigation through menus, launching applications, and viewing content.
SIM/SD card installation is a straightforward process, requiring the user to power off the mobile device before inserting the cards into their respective slots. This ensures proper recognition and functionality of the cards.
Charging the phone is done by connecting it to a charger or a computer via a USB cable. The manual emphasizes the importance of using only INFINIX chargers and cables to prevent damage and maintain warranty validity, highlighting the device's specific power requirements.
While the manual primarily focuses on initial setup and basic operation, it provides crucial information regarding device maintenance through its FCC Statement and SAR Information Statement.
The FCC Statement outlines the device's compliance with regulatory standards, ensuring it operates without causing harmful interference and accepts any received interference. This section also advises users on how to troubleshoot potential interference issues, such as reorienting the receiving antenna or increasing separation between the equipment and receiver. These guidelines implicitly suggest that maintaining a clear environment for the device can contribute to its optimal performance.
The SAR Information Statement details the device's Specific Absorption Rate, which is a measure of the radiofrequency (RF) energy absorbed by the body. This information is critical for user safety and indicates that the device is designed to operate within established safety limits. For body-worn operation, the manual specifies a minimum separation distance of 10mm between the user's body and the handset, including the antenna. It also advises against using third-party belt-clips, holsters, and similar accessories that contain metallic components and do not meet RF exposure requirements. This guidance is a key maintenance feature, as it helps users ensure the device is used in a manner that minimizes RF exposure and maintains compliance with safety standards. Adhering to these recommendations helps prolong the device's safe operational life and protects the user.
The inclusion of various rubber components, such as the Bat FPC con rubber, LCM CONN Rubber, PA Tcs Rubber, F CAM Rubber, LT sensor Rubber, R CAM Rubber, Earphone Rubber, and USB Rubber, suggests an effort to protect internal components from dust, moisture, and minor impacts. These elements contribute to the device's durability and long-term reliability.
The explosion diagram, by detailing each component, implicitly aids in potential repairs or part replacements, although these actions are typically performed by authorized service personnel. The presence of screws (screw L3.5, screw L2.5) indicates that the device can be disassembled for servicing if needed.
General| SIM | Dual SIM (Nano-SIM, dual stand-by) |
|---|---|
| Display Type | IPS LCD, 120Hz |
| Main Camera Features | Quad-LED flash, HDR, panorama |
| Selfie Camera Features | Dual-LED flash |
| Selfie Camera Video | 1080p@30fps |
| 3.5mm jack | Yes |
| Bluetooth | 5.0, A2DP, LE |
| GPS | Yes, with A-GPS |
| Radio | FM radio |
| Sensors | Fingerprint (side-mounted), accelerometer, gyro, proximity, compass |
| Battery | Li-Po 5000 mAh, non-removable |
| Model | X698 |
| Status | Available |
| Build | Glass front, plastic back, plastic frame |
| Resolution | 1080 x 2460 pixels |
| CPU | Octa-core (2x2.0 GHz Cortex-A76 & 6x2.0 GHz Cortex-A55) |
| Internal Storage | 256GB 8GB RAM |
| Main Camera Video | 1080p@30fps |
| Selfie Camera | 16 MP |
| Loudspeaker | Yes |
| WLAN | Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct |
| USB | USB Type-C 2.0, OTG |
| Charging | 33W wired |
| Colors | Black, Green |
To Next Page
