EasyManuals Logo

InfiRay EYE III Quick Start Guide

InfiRay EYE III
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
home screen. Press or rotate the
Controller (3) to wake up the
Device.
lIn the standby mode, briefly press
the Camera button (4) to power
off the device.
lPower off: On the home screen,
press and hold the Controller (3) +
Camera button (4) at the same
time to enter the power-off
countdown interface. The device will be powered off when
the 3s countdown ends. And the shutdown can be stopped
by rotating the Controller (3) before the countdown ends.
Charging
The Eye III series is supplied with a built-in rechargeable Li-ion
battery pack, which allows operation up to 8 hours. When
using the device for the first time, please fully charge it first.
lConnect the Type C end of the data cable (10) to the Type C
port (5) of the device.
lConnect another port of the data cable (10) to the power
adapter (11).
lInsert the plug of the adapter to the 110-240V socket (12).
lWhen the device is charging, the power indicator (6) next to
the Type C port (5) is red. The power indicator (6) is on only
Note: If the standby time exceeds 30 minutes, the device will
automatically shut down.
4
ENGLISH

Other manuals for InfiRay EYE III

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the InfiRay EYE III and is the answer not in the manual?

InfiRay EYE III Specifications

General IconGeneral
BrandInfiRay
ModelEYE III
CategoryMonocular
LanguageEnglish

Related product manuals