InfiRay Outdoor • EYE III Series • User Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission. - 9 -
the Camera button (4) to start / stop a video recording. And long press
the Camera button (4) to take a photo.
⚫ Power off: After using the device, close the lens cap (9), and the power-
off shutdown interface will be displayed in 3s. During the shutdown
countdown, rotate the Controller (3) or reopen the lens cap (9) to stop
it. Alternatively, on the home
screen, press and hold the
Controller (3) + Camera button
(4) at the same time to power off
the device.
⚫ Standby: During the power-off
shutdown countdown, short
press the Camera button (4) to
active the standby mode.
Alternatively, on the home
screen, short press the Camera
button (4) twice to standby the
device. If there is no operation performed for 30 minutes, the product
will automatically shut down.
9 Status Bar
The status bar is located at the top of the image interface and displays the
information related to the current operating status of the device.
1. Current image mode ( : White hot; : Black hot; : Red hot; :
Rainbow)
2. Current scene mode ( : Forest; : Flatland; : Focus; :City)
3. Current digital zoom (1.0× to 4.0× adjustable, with an interval of 0.5,
such as 1.5×)
4. Ultra-clear mode status (displayed when the mode is on)
5. Auto calibration (displayed when it is on)
6. Compass (displayed when the compass is on)
7. Interconnection (displayed when it is connected successfully, it will not
be displayed simultaneously with the Wi-Fi icon)
8. Microphone (displayed when it is on)
9. Wi-Fi status (displayed when it is on, it will not be displayed
simultaneously with the Interconnection icon)
10. Clock (synchronize the time in the InfiRay Outdoor app)
To Next Page
Loading...
Need help?
General
