InfiRay EYE III User Manual

InfiRay Outdoor • EYE III Series • User Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission. - 13 -
➢ Press and hold the Controller (3) to save the changes and return to the
home screen.
➢ It will automatically save the changes and return to the home screen if
there is no operation within 5s.
14 Main Menu Function
⚫ On the home screen, press and hold the Controller (3) to enter the
main menu interface.
⚫ There are two pages of the function options. Rotate the Controller (3)
to switch among the menu options.
⚫ Menu navigation is cyclical: as soon as the last menu option of the first
page is reached, it will turn to the first menu option of the second page
when clockwise rotate the Controller (3), and vice versa.
⚫ Press briefly the Controller (3) to adjust the current parameters or
enter the sub-menus.
⚫ In all menu interfaces, press and hold the Controller (3) to save and
exit to the home screen, or short press the Camera button (4) to
return to the home screen without saving.
⚫ Automatic exiting from the menu to the home screen will occur when
there is no operation within 10 seconds.
⚫ During the continuous operation of the EYE III, when you exit from the
main menu, the cursor remains at the position before exiting. When
you restart the thermal imaging monocular and enter the main menu
for the first time, the cursor stays at the first menu option.
Menu Options and Descriptions
Ultra-Clear
Turn Ultra-Clear mode on/off
⚫ Press and hold the Controller (3) to enter the Main Menu interface.
⚫ Rotate the Controller (3) to select the Ultra-Clear option. Ultra-clear option is selected by default when entering the menu

InfiRay EYE III Specifications

General

Brand	InfiRay
Model	EYE III
Category	Monocular
Language	English