Why won't my InfiRay Thermal cameras connect to my phone or computer?
There might be a few reasons why your device isn't connecting. First, double-check that you've entered the correct Wi-Fi password. Also, too many Wi-Fi networks in the area can cause interference. Try moving to a location with fewer networks or no Wi-Fi coverage to establish a stable connection.
What to do if the image on my InfiRay Thermal cameras is too dark?
If the image appears too dark, the screen brightness might be set too low. Try adjusting the display brightness to see if that improves the image visibility.
How to fix blurry image on InfiRay Tube TL25 SE, but the icons are clear?
If your icons are clear but the image is blurry, it could be due to a focusing issue or the lens condition. Here's what you can do: * Rotate the lens focus ring to adjust the focus. * Inspect the lens for dust or ice. If present, gently wipe the outer optical surface with a soft cotton cloth, or allow the scope to dry in a warm, dry environment for at least 4 hours.
What to do if Wi-Fi signals are lost on InfiRay Tube TL25 SE Thermal cameras?
If you're experiencing Wi-Fi signal loss or interruption, it could be because the device is out of Wi-Fi range or there's an obstruction, like a concrete wall, blocking the signal. Try moving to a location where you can receive Wi-Fi signals clearly.
Why does the reticle position move after shooting with InfiRay Tube TL25 SE Thermal cameras?
If the reticle position shifts after shooting, the scope or clamp might not be securely mounted. Check that the scope is firmly attached. Also, ensure the bullet type and caliber match what was used during zeroing. Keep in mind that zeroing may slightly change between seasons (summer to winter or vice versa).
What to do if my InfiRay Thermal cameras won't start?
If the scope won't start, the battery is likely out of charge. Charge the device.
What to do if my InfiRay Tube TL25 SE Thermal cameras observed target disappears?
If the observed target disappears, it might be because you are observing the target through glass. Observe the target directly without the presence of glass.
What to do if my InfiRay Thermal cameras won't power on with an external power supply?
If the device isn't powering on with an external power supply, the USB cable may be damaged; replace it. Also, the external power supply may be insufficient; check it if necessary.
General| Brand | InfiRay |
|---|---|
| Model | Tube TL25 SE |
| Category | Thermal cameras |
| Language | English |
Guidelines for device handling, environmental exposure, and risk of swallowing small parts.
Details about the thermal detector, including type, resolution, pixel size, NETD, and frame rate.
Specifications related to the lens, field of view, magnification, and eye relief.
Identifies and illustrates the main physical components and controls of the scope.
Describes various functions controlled by the power button, including power on/off and calibration.
Explains how to adjust image magnification using the zoom handwheel.
Details menu navigation, selection, and function activation using the controller and its combinations.
Covers reticle movement, brightness adjustment, and zeroing distance control via the controller.
Important safety guidelines and recommendations for charging the device's built-in battery.
Instructions and recommendations for securely mounting the TUBE SE Series scope onto a firearm.
Guides through the zeroing process, including selecting profiles, distances, and using the zeroing interface.
Explains automatic, manual, and background calibration methods to improve image quality.
Instructions for connecting and operating an external laser rangefinder module with the scope.
Explains continuous and single ranging modes, and how to switch measurement units.
Detailed steps for performing zeroing using the interface, including reticle adjustment.
Calibrating the laser rangefinder to ensure accurate target alignment.
Detailed steps for calibrating the laser rangefinder cursor alignment.
A table listing common faults, their possible causes, and recommended solutions.
Addresses issues related to Wi-Fi connectivity, signal loss, and image quality problems.
To Next Page
