How to fix InFocus Projector that does not turn on?
If your InFocus Projector doesn't turn on, check the following: * Ensure the power cord is securely plugged into the AC inlet on the projector and the power outlet. If the outlet has a switch, make sure it's on. * If the projector is cooling down, wait until the process is complete before attempting to turn it on again.
What to do if my InFocus Projector has no picture?
If your InFocus Projector displays no picture, there might be several reasons: * The video source might not be turned on or connected correctly. Ensure the video source is on and the signal cable is properly connected. * The projector might not be correctly connected to the input signal device. Check the connection. * The input signal might not be correctly selected. Select the correct input signal using the SOURCE key on the projector or remote. * The lens cover might be closed. Open the lens cover.
How to fix blurred image on InFocus IN102?
If the image on your InFocus Projector is blurred: * Adjust the focus of the lens using the focus ring. * Adjust the projection angle, direction, and height of the unit to properly align the projector and screen. * Make sure the lens cover is open.
What to do if InFocus Projector remote control does not work?
If the remote control for your InFocus Projector isn't working: * Replace the battery with a new one. * Make sure there are no obstacles between the remote and the projector. * Ensure you are within 8 meters (26 feet) of the projector.
General| Projection distance | 1.49 - 6 m |
|---|---|
| Projection technology | DLP |
| Contrast ratio (typical) | 1500:1 |
| Projector native resolution | SVGA (800x600) |
| Aspect ratio | 16:10 |
| Dimensions (WxDxH) | 264.2 x 223.5 x 94 mm |
| Lamp power | 220 W |
| Light source type | Lamp |
| Service life of light source | 3000 h |
| Service life of light source (economic mode) | 4000 h |
| Analog signal format system | NTSC, PAL, SECAM |
| RMS rated power | 2 W |
| Number of built-in speakers | 1 |
| Noise level | 33 dB |
| Power consumption (typical) | 228 W |
| Product type | Standard throw projector |
Weight and Dimensions| Weight | 2300 g |
|---|
To Next Page
