To Next Page
T
tdanielsAug 17, 2025
How to flip image on InFocus IN114x Projector?
- MmccarthyjeffreyAug 17, 2025
To flip the image on your InFocus Projector, turn off Ceiling Mount in the Basic menu.
How to flip image on InFocus IN114x Projector?
To flip the image on your InFocus Projector, turn off Ceiling Mount in the Basic menu.
How to fix fuzzy or cropped image on InFocus Projector?
To fix a fuzzy or cropped image on your InFocus Projector, change the computer's "Resolution" setting to match the projector's resolution (Windows 7: Control Panel > Display > Screen Resolution). This setting change process varies per operating system.
How to center the image on InFocus IN114x?
To center the image on the screen with your InFocus Projector, move the projector, adjust its height, and adjust the horizontal or vertical position in Advanced Menu > Image > PC... menu.
How to make InFocus Projector image sharper?
To make the image sharper on your InFocus Projector, adjust the Sharpness in the Basic Menu.
How to square the image on InFocus IN114x?
To square the image on your InFocus Projector, adjust the Keystone on the keypad.
Why only laptop background appears on InFocus IN114x Projector?
If only your laptop’s background appears and not the Desktop icons on your InFocus Projector, change the Multiple Display setting to "Duplicate these displays" (Windows 7: Control Panel > Display > Screen Resolution). This setting change process varies per operating system.
How to correct reversed image on InFocus IN114x Projector?
To correct a reversed image on your InFocus Projector, turn off Rear Project in Advanced Menu > Setup > Image Setup... menu.
What to do if my InFocus IN114x says “Signal out of range”?
If your InFocus Projector displays “Signal out of range”, press the Auto Image button on the remote. You may also need to adjust the computer refresh rate (Windows 7: Control Panel > Display > Screen Resolution > Advanced Settings > Adapter tab). This varies per operating system. Setting a different resolution on your computer might also help.
How to fix InFocus Projector with no start up screen?
To fix an InFocus Projector with no start-up screen, plug the power cord into the projector and press the Power button.
General| Noise Level | 32 decibels |
|---|---|
| White Brightness | 3200 lumens |
| Native Resolution | 1024 x 768 |
| Contrast Ratio | 15000:1 |
| Aspect Ratio | 4:3 |
| Throw Ratio Range | 1.9 - 2.09:1 |
| 3D | yes |
| Maximum Screen Size | 299 inches |
| Focus Adjustment | manual |
| Minimum Distance | 3.3 feet |
| Maximum Distance | 33 feet |
| Video Input | hdmi |
| Inputs | hdmi |
| Sound Mode | mono |
| Built In Speakers | yes |
| Speakers Output | 2 watts |
| Remote Control | yes |
| OS Compatibility | mac, windows |
Weight and Dimensions| Depth | 8.7 inches |
|---|---|
| Height | 4.8 inches |
| Width | 11.5 inches |
| Net Weight | 5.4 pounds |
Connects projector to computer via VGA.
Connects projector to video device via HDMI.
Connects the projector's power cord to an outlet.
Connects audio and monitor out for computer.
Connects video device to projector via HDMI.
Connects composite video to projector.
Connects video device to projector via VGA.
Connects component video to projector via adapter.
Connects S-video to projector.
Connects audio source for sound.
Instructions for cleaning the projector lens.
How to use the projector's security lock.
