27
Advanced Menu
Image:
3D Control:
3D: allows you
to enjoy 3D (stereoscopic) content. Your projector supports
Auto, Top-Bottom, Frame Sequential, Frame Packing, Side-by-Side for con-
trolling LCD shutter glasses. In addition to the
projector, you will need a pair
of 3D shutter glasses, 3D content, and 3D compatible source (and emitter).
Ensure the glasses you choose are consistent with the synchronization mode
you will be using.
3D Sync Invert: If the imag
e appears to flutter, look odd or if the image depth
looks off or you experience eye strain, turn this feature on to see if the image
improves.
Color...
Color:
adjusts a video image from black and white to fully saturated color. The
color setting applies to video sources only. NOTE: Not available on the
IN118HDxc or IN119HDxc.
Red/Green/green Gain:
adjusts the gain of the red, green or green channel of
the image.
Red/Green/green Offset: adjusts the offset of the red, green or green channel
of the image.
Color Space:
applies to computer and component video sources. It allows you
to select a color space that has been specifically tuned for the input signal.
When Auto is selected, the projector automatically determines the standard. To
choose a different setting, turn off Auto, then choose RGB for computer
sources or choose either REC709 or REC601 for component video sources.
Color Temperature: c
hanges the intensity of the colors. Select a listed relative
warmth value.
Gamma: sel
ect the appropriate gamma from among Video, Film, Bright, and
CRT.
Tint:
adjusts the red-green color balance in the image of NTSC video images.
The tint setting applies to NTSC video sources only. NOTE: Not available on
the IN118HDxc or IN119HDxc.
White Intensity: increases
the brightness of whites that are near 100%.
PC:
Phase: adjusts the horizontal phase of a computer source.
Prevent PC Screen Saver: p
revents your computer from going into Screen
Save mode. The projector must be connected to the PC via a USB cable for
this feature to work.
Sync Threshold: (progressive signals
only) If a hardware device, such as a
DVD player, is not syncing properly with the projector, select this option to
help it to sync when connected to the projector.
Tracking: adjusts the
vertical scan of a computer source.
Horizontal/Vertical Position:
adjusts the position of a computer source.
Video:
Overscan:
removes noise around the video image.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
