InFocus IN114x User Manual

21
Using the audio
Using the projector’s speakers
Connect the audio source to the Audio 1/Audio 2 connectors to hear audio through
the projector speakers.
Amplified speakers may also be connected to the projector using the Audio Out
connector.
To adjust the volume, press the Vo
lume buttons on the remote.
Troubleshooting Audio
If you aren’t hearing the audio, check the following:
• Make sure the audio cable is connected to the Audio
1/Audio 2 connector on
the projector, and that the other end of the cable is connected to an Audio Out
connector on the source (not a “line-in” or “microphone” connector).
• Make sure the volume is turned up enough. Press the Vo
lume button on the
remote.
• Make sure the correct source is active.
• Adjust the audio source.
• If playing a video, make sure the
playback has not been paused.
connect audio cable

InFocus IN114x Specifications

General

Noise Level	32 decibels
White Brightness	3200 lumens
Native Resolution	1024 x 768
Contrast Ratio	15000:1
Aspect Ratio	4:3
Throw Ratio Range	1.9 - 2.09:1
3D	yes
Maximum Screen Size	299 inches
Focus Adjustment	manual
Minimum Distance	3.3 feet
Maximum Distance	33 feet
Video Input	hdmi
Inputs	hdmi
Sound Mode	mono
Built In Speakers	yes
Speakers Output	2 watts
Remote Control	yes
OS Compatibility	mac, windows

Weight and Dimensions

Depth	8.7 inches
Height	4.8 inches
Width	11.5 inches
Net Weight	5.4 pounds