To Next Page
T
Troy GarciaAug 16, 2025
How to flip image on InFocus IN116x?
- DDavid NguyenAug 16, 2025
To flip the image on your InFocus Projector, turn off Ceiling Mount in the Basic menu.
How to flip image on InFocus IN116x?
To flip the image on your InFocus Projector, turn off Ceiling Mount in the Basic menu.
How to center the image on InFocus Projector?
To center the image on the screen with your InFocus Projector, move the projector, adjust its height, and adjust the horizontal or vertical position in Advanced Menu > Image > PC... menu.
How to make InFocus Projector image sharper?
To make the image sharper on your InFocus Projector, adjust the Sharpness in the Basic Menu.
How to square the image on InFocus Projector?
To square the image on your InFocus Projector, adjust the Keystone on the keypad.
Why only laptop background appears on InFocus IN116x?
If only your laptop’s background appears and not the Desktop icons on your InFocus Projector, change the Multiple Display setting to "Duplicate these displays" (Windows 7: Control Panel > Display > Screen Resolution). This setting change process varies per operating system.
How to correct reversed image on InFocus Projector?
To correct a reversed image on your InFocus Projector, turn off Rear Project in Advanced Menu > Setup > Image Setup... menu.
What to do if my InFocus IN116x Projector says “Signal out of range”?
If your InFocus Projector displays “Signal out of range”, press the Auto Image button on the remote. You may also need to adjust the computer refresh rate (Windows 7: Control Panel > Display > Screen Resolution > Advanced Settings > Adapter tab). This varies per operating system. Setting a different resolution on your computer might also help.
How to fix InFocus Projector with no start up screen?
To fix an InFocus Projector with no start-up screen, plug the power cord into the projector and press the Power button.
How to fit image to 4:3 or 16:9 screen on InFocus IN116x?
To fit the image to a 4:3 or 16:9 screen on your InFocus Projector, change the aspect ratio to 4:3 or 16:9 in Basic Menu > Aspect Ratio menu.
How to fix fuzzy or cropped image on InFocus Projector?
To fix a fuzzy or cropped image on your InFocus Projector, change the computer's "Resolution" setting to match the projector's resolution (Windows 7: Control Panel > Display > Screen Resolution). This setting change process varies per operating system.
Proper placement and environmental conditions for safe projector operation.
Cautions regarding touching the lens, dropping, spills, and power cord handling.
Critical safety information about the high-pressure mercury lamp and its disposal.
Guidelines for safe installation, including ceiling mounts, and servicing procedures.
How to correct image distortion using keystone buttons.
How to operate the projector using the remote's buttons and its optimal range.
Steps to resolve common audio playback issues.
How to open, navigate, and exit the projector's menu system.
Overview of the two menu structures: Basic for common, Advanced for complex adjustments.
Managing power saving, AC power on, and auto source selection.
Setting up and changing the projector's PIN for security.
Resetting lamp hours and restoring factory default settings.
Instructions for safely cleaning the projector lens.
Important notes and warnings before replacing the projector lamp.
Precautions for handling the lamp module, avoiding burns, and safety during replacement.
General| Resolution | XGA (1024 x 768) |
|---|---|
| Contrast Ratio | 20000:1 |
| Lamp Life | 10, 000 hours (Eco Mode) |
| Connectivity | HDMI, VGA, USB, Audio In/Out |
| Zoom Ratio | 1.1x |
| Projection Size | 30" to 300" |
