Why won't the lamp turn on and the temperature light is on in my InFocus Projector?
If the lamp won't turn on and the temperature light is on, make sure the vents aren't blocked. Turn off the InFocus Projector and allow it to cool for one minute.
What to do if the InFocus IN1110 Projector is too hot?
If your InFocus Projector is overheating, ensure that the vents are not blocked. Turn off the projector, wait one minute, and then turn it on again.
General| Resolution | XGA (1024 x 768) |
|---|---|
| Lamp Life (Eco Mode) | 10000 hours |
| Lamp Life (Normal) | 5000 hours |
| Projection Technology | DLP |
| Screen Size | 30 - 300 inches |
| Zoom Ratio | 1.1x |
| Aspect Ratio | 4:3 |
| Inputs | HDMI, VGA, Composite Video |
| Outputs | Audio Out |
Lists trademarks related to the product and its software.
Details FCC compliance rules and potential interference issues.
Warns about potential radio interference in domestic environments.
Confirms compliance with Canadian digital apparatus standards.
Lists key agency approvals including UL and CUL.
Stresses using genuine InFocus lamps for safety and warranty maintenance.
Outlines safety measures for handling potential projector lamp ruptures.
Controls 3D display and color parameters like space, temperature, and tint.
Manages PIN entry for startup and enables PIN protection.
Restores all settings to default and displays current projector information.
Information on lamp hours, replacement messages, and critical safety warnings.
Step-by-step guide for safely replacing the projector lamp module.
To Next Page
