22
Optimizing video images
After your video device is connected properly and the image is on the screen, you
can optimize the image using the onscreen menus. For general information on using
the menus, see page 23.
• Adjust the Keystone, Contrast, Brightness, Color
, or Tint in the Basic menu
(page 24).
• Change the Aspect Ratio. Choose the option that best fits your input source
(page 24).
• Select a Sharpness setting in the Basic menu (page 24).
• Adjust the Color Temperature in the Advanced > Image > Colo
r Menu. Select
a listed warmth value (page 25).
• Turn on Overscan in the Advanced > Image > V
ideo Menu to remove noise on
the edges of the image (page 25).
Customizing the projector
You can customize the projector for your specific setup and needs. See page 26 to
page 27 for details on these features.
• For rear projection, turn Rear Project
on in the Advanced > Setup > Image
Setup menu.
• Specify which source the projector checks first f
or active video during power-
up.
• Specify the function of the Custom key on the remote.
• Turn the projector’s display messages on and off.
• Turn on power saving features.
• Specify appearance of blank screen and
startup screen.
• Specify the language viewed on the menus.
• Save settings for the active source as a preset.
To Next Page
Loading...
Need help?
General
