What to do if InFocus IN1112A shows 'Replace lamp' message?
If the “Replace lamp” message appears at startup, the lamp won’t turn on, and the Lamp light is on for your InFocus Projector, the lamp must be replaced. Loosen the screws to replace it.
How to fix fuzzy or cropped image on InFocus Projector?
If the image from your InFocus Projector appears fuzzy or cropped, you should change your computer's resolution setting to match the projector's resolution. On Windows 7, this can be found in Control Panel > Display > Screen Resolution. Note that the exact steps may vary depending on your operating system.
How to center image on InFocus Projector?
To correct the image if it's not centered on the screen when using the InFocus Projector, try these steps: 1. Physically move the projector. 2. Adjust the zoom. 3. Adjust the height. Also, you can adjust the horizontal or vertical position in the Advanced > Setup > Image Setup menu.
How to fix not square image on InFocus Projector?
To resolve an image that is not square on your InFocus Projector, adjust the Keystone setting on the keypad.
How to make InFocus Projector image sharper?
To make the image sharper on your InFocus Projector, adjust the Sharpness setting in the Basic menu.
How to fit image to screen on InFocus IN1112A?
To correct the image size on your InFocus Projector so that it fits a 4:3 or 16:9 screen, change the aspect ratio to 4:3 or 16:9 in the Basic menu.
How to correct reversed image on InFocus IN1112A Projector?
If the image is reversed left to right on your InFocus Projector, turn off Rear Project in the Advanced > Setup > Image Position menu.
What to do if InFocus IN1112A lamp won’t turn on and Temperature light is on?
If the lamp won’t turn on and the Temperature light is on for your InFocus Projector, make sure the vents aren’t blocked. Then, turn off the projector and allow it to cool for one minute.
What to do if InFocus IN1112A says 'Signal out of range'?
If the InFocus Projector displays 'Signal out of range', first, try pressing the Auto Image button on the keypad. If that doesn't work, adjust your computer's refresh rate via Control Panel > Display > Screen Resolution > Advanced Settings > Monitor tab (the path may vary based on your operating system). You might also need to adjust your computer's resolution, similar to the process for a fuzzy or cropped image.
Why does my InFocus Projector only show my laptop background?
If only your laptop's background appears on the InFocus Projector, and not the Desktop icons, change the Multiple Display setting to "Duplicate these displays". For Windows 7, this is located in Control Panel > Display > Screen Resolution. The exact steps may be different depending on your operating system.
General| Native Resolution | 1280 x 800 |
|---|---|
| Contrast Ratio | 2600:1 |
| Aspect Ratio | 16:10 |
| Throw Ratio Range | 1.55 - 1.7 |
| 3D | yes |
| Minimum Screen Size | 28 inches |
| Maximum Screen Size | 304 inches |
| Minimum Distance | 3.9 feet |
| Maximum Distance | 39 feet |
| USB Ports | 1 |
| Video Input | vga, hdmi, composite video |
| Inputs | vga, hdmi, usb, composite video, 3.5mm audio |
| Remote Control | yes |
| OS Compatibility | windows, mac |
Weight and Dimensions| Depth | 7.1 inches |
|---|---|
| Height | 2.5 inches |
| Width | 8.4 inches |
| Net Weight | 2.7 pounds |
Common image adjustments like Aspect Ratio, Brightness, Contrast, Keystone, Presets, Sharpness, and Volume.
Controls for 3D display and sync inversion.
Adjusts color settings like space, temperature, tint, and gains.
Settings for computer sources like Force Wide, Phase, Tracking, and PC Screen Saver.
Settings for video sources like Closed Captions and Overscan.
Read-only display of current source settings.
Read-only display of current projector settings including lamp hours.
Resets the lamp hours counter after lamp replacement.
Restores all projector settings to their default values.
Configuration for projector version, language, hostname, and USB connection.
Adjusts video display ratio and repeat mode.
Adjusts photo display ratio and slideshow settings.
Adjusts audio repeat mode for audio playback.
Sets up the projector as a wireless access point.
Connects the projector to an existing WiFi network.
Instructions for cleaning the projector lens using non-abrasive materials.
Information on using a security lock with a cable lock system.
To Next Page
