InFocus IN1110 User Manual

2
Table of Contents
Introduction 3
Positioning the projector 5
Connecting a computer source 6
VESA connection 6
HDMI connection 6
Power connection 6
Optional computer connections 6
Displaying an image 7
Adjusting the image 8
Video device connections 9
Composite video connection 9
HDMI 1.3 connection 9
S-video connection 9
VESA connection 9
Component video connection 9
Shutting down the projector 10
Troubleshooting your setup 10
Using the remote control 18
Using the audio 19
Using the keypad buttons 20
Optimizing computer images 21
Presentation features 21
Optimizing video images 22
Customizing the projector 22
Using the menus 23
Basic menu 24
Advanced > Image menu 25
Advanced > Setup menu 26
Advanced > Status/Service menu 30
Maintenance 31
Cleaning the lens 31
Using the security lock 31
Replacing the projection lamp 32
Important Operating Considerations for Safety
• Place the projector in a horizontal position no
greater
than 15 degrees off axis.
• Locate the projector in a well-ventilated area without any obstructions to
intake or exhaust vents. Do
not place the projector on a tablecloth or other soft
covering that may block the vents.
• Locate the projector at least 4' (1.2 m) away from any h
eating or cooling vents.
• Only genuine InFocus lamps are tested for use in this projector.
InFocus is not
liable for the performance, safety or certification of any other lamps. The use
of other lamps violates the projector warranty and voids all certification marks
on this projector.
• Use only the power cord provided. A sur
ge-pro
tected power strip is
recommended.
• Refer to this guide for proper startup and shutdown procedures.
• Hg – Lamp contains mercury
. Manage in accordance with local disposal laws.
See www.lamprecycle.org.
• In the unlikely event of a lamp rupture, particles
may exit through the p
rojector
side vents. When the projector is turned on, keep people, food, and drinks out
of the "keep out" area under and around the projector, as indicated by the "X"
areas below.
2’ / 0.6 m
3’ / 1 m
5
’ /1.5m
8
’
/2.4m
Follow these instructions to help ensure image quality and lamp life over the life of
the projector. Failure to follow these instructions may affect the warranty. For
complete details of the warranty, see the Warranty Booklet.

InFocus IN1110 Specifications

General

Brand	InFocus
Model	IN1110
Category	Projector
Language	English