Why won't the lamp turn on and the temperature light is on in my InFocus Projector?
If the lamp won't turn on and the temperature light is on, make sure the vents aren't blocked. Turn off the InFocus Projector and allow it to cool for one minute.
What to do if the InFocus IN1110 Projector is too hot?
If your InFocus Projector is overheating, ensure that the vents are not blocked. Turn off the projector, wait one minute, and then turn it on again.
General| Resolution | XGA (1024 x 768) |
|---|---|
| Lamp Life (Eco Mode) | 10000 hours |
| Lamp Life (Normal) | 5000 hours |
| Projection Technology | DLP |
| Screen Size | 30 - 300 inches |
| Zoom Ratio | 1.1x |
| Aspect Ratio | 4:3 |
| Inputs | HDMI, VGA, Composite Video |
| Outputs | Audio Out |
To Next Page
