InFocus IN102 User Manual

264 mm (10.4”)
96.1 mm (3.8”)
60 mm (2.4”) 66 mm (2.6”)
Projection dimensions
Refer to the picture below for the center of lens dimensions of this projector
before calculating the appropriate position.
Projection distance
Center of lens
Screen
Vertical offset
Maximum zoom
Minimum zoom
4:3 screen diagonal
Recommended projection distance from
screen
Vertical offset
Min length
(with max.
zoom)
Average
Max length
(with min.
zoom)
There is 3% tolerance among these numbers due to optical component variations. InFocus recommends that if you intend to
permanently install the projector, you should physically test the projection size and distance using the actual projector before
you permanently install it, so as to make allowance for this projector's optical characteristics. This will help you determine the
exact mounting position so that it best suits your installation location.

InFocus IN102 Specifications

General

Projection distance	1.49 - 6 m
Projection technology	DLP
Contrast ratio (typical)	1500:1
Projector native resolution	SVGA (800x600)
Aspect ratio	16:10
Dimensions (WxDxH)	264.2 x 223.5 x 94 mm
Lamp power	220 W
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	4000 h
Analog signal format system	NTSC, PAL, SECAM
RMS rated power	2 W
Number of built-in speakers	1
Noise level	33 dB
Power consumption (typical)	228 W
Product type	Standard throw projector

Weight and Dimensions

Weight	2300 g