How to fix a fuzzy or cropped image on InFocus in2124?
To resolve a fuzzy or cropped image on your InFocus Projector, change the computer's "Resolution" setting to match the projector's resolution. For Windows 7, this can be found at Control Panel > Display > Screen Resolution. Note that the exact steps may vary depending on your operating system.
What to do if my InFocus in2124 says 'Signal out of range'?
If your InFocus Projector displays 'Signal out of range', try pressing the Auto Image button on the remote. Additionally, adjust your computer's refresh rate (for Windows 7, go to Control Panel > Display > Screen Resolution > Advanced Settings > Adapter tab; this varies per operating system). You might also need to set a different resolution on your computer.
Why does my InFocus in2124 only show my laptop background?
If your InFocus Projector only displays your laptop's background and not the desktop icons, change the Multiple Display setting to "Duplicate these displays". On Windows 7, this setting can be found under Control Panel > Display > Screen Resolution. The location of this setting may vary depending on your operating system.
What to do if my InFocus Projector has no start up screen?
If your InFocus Projector shows no start-up screen, plug the power cord into the projector and press the power button.
To Next Page
General
