How to fix a fuzzy or cropped image on InFocus Projector?
To resolve a fuzzy or cropped image on your InFocus Projector, change the computer's "Resolution" setting to match the projector's resolution. For Windows 7, this can be found at Control Panel > Display > Screen Resolution. Note that the exact steps may vary depending on your operating system.
What to do if my InFocus in2126 says 'Signal out of range'?
If your InFocus Projector displays 'Signal out of range', try pressing the Auto Image button on the remote. Additionally, adjust your computer's refresh rate (for Windows 7, go to Control Panel > Display > Screen Resolution > Advanced Settings > Adapter tab; this varies per operating system). You might also need to set a different resolution on your computer.
Why does my InFocus Projector only show my laptop background?
If your InFocus Projector only displays your laptop's background and not the desktop icons, change the Multiple Display setting to "Duplicate these displays". On Windows 7, this setting can be found under Control Panel > Display > Screen Resolution. The location of this setting may vary depending on your operating system.
What to do if my InFocus in2126 Projector has no start up screen?
If your InFocus Projector shows no start-up screen, plug the power cord into the projector and press the power button.
States projector conforms to EU directives and norms like ErP, EMC, Low Voltage.
Advises on compliance with FCC rules and potential interference issues.
Details crucial guidelines for safe projector operation, ventilation, and handling.
Introduces the projector, its resolutions, compatibility, accessories, and online registration.
Describes various input/output ports on the projector for computer and video connections.
Details how to connect computers via VGA, HDMI, and optional audio, plus connecting power.
Explains powering on, selecting source, and activating external video ports, including laptop specific steps.
Covers adjusting height, leveling, zoom, focus, keystone, contrast, and brightness.
Describes how to connect devices using HDMI, Composite, VGA, Component, S-Video, and audio inputs.
Covers projector shutdown, Auto Off Time, status lights, and initial setup troubleshooting.
Addresses issues like signal out of range, fuzzy, cropped, uncentered, non-square, and non-sharp images.
Covers PowerPoint video playback issues, projector overheating, and lamp startup problems.
Details remote operation, functions, and troubleshooting common issues.
Explains connecting audio sources and troubleshooting audio issues.
Details the functions of the projector's physical keypad buttons for navigation and control.
Guides on fine-tuning computer and video image settings using menus and presets.
Highlights presentation features and covers customizing projector settings like rear projection and startup source.
Introduces the Basic Menu for common adjustments like aspect ratio, brightness, and contrast.
Introduces the Advanced Menu for more complex settings and system configurations.
Details advanced image adjustments like 3D Control, Color, PC, and Video settings.
Covers settings like Overscan, Zoom, Rear Project, Ceiling Mount, and keypad/remote lock functions.
Details lamp dimming, OSD, timers, PIN protection, Power Saving, and Source management.
Details DHCP, IP Address, Subnet Mask, and Default Gateway for network setup.
Guides on setting up LAN control and accessing the projector via a web browser.
Details the Tools page for managing Crestron control, network settings, and passwords.
Explains how to set up the projector with Crestron RoomView software for centralized management.
Provides instructions and warnings for safely cleaning the projector lens.
Step-by-step guide on safely replacing the lamp module and resetting the timer.
To Next Page
General
