Need help?Do you have a question about the InFocus IN24 and is the answer not in the manual?
General| Matrix size | 0.55 \ |
|---|---|
| Number of colors | 16.78 million colors |
| Native aspect ratio | 4:3 |
| Projection distance | - m |
| Vertical scan range | 50 - 85 Hz |
| Horizontal scan range | 15.85 - 85 kHz |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:9 |
| Contrast ratio (typical) | 2000:1 |
| Screen size compatibility | 33.6 - 248.4 \ |
| Projector native resolution | SVGA (800x600) |
| Keystone correction, vertical | 25 - 30 ° |
| Projector brightness (economic mode) | 1360 ANSI lumens |
| Lamp type | SHP |
| Lamp power | 200 W |
| Light source type | Lamp |
| Lamp power (economic mode) | 160 W |
| Service life of light source | 3000 h |
| 3D | - |
| Full HD | No |
| Supported video modes | 1035i, 1080i, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC, PAL, SECAM |
| Noise level | 35 dB |
| Plug and Play | Yes |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | - W |
| Power consumption (typical) | 250 W |
| Operating temperature (T-T) | 10 - 40 °C |
| Focal length range | - mm |
| RS-232 ports | 0 |
| Maximum analog resolution | 1024 x 768 pixels |
| RMS rated power | 1 W |
| Number of built-in speakers | 1 |
| USB connector type | USB Type-B |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Placement | Desktop, Ceiling |
| Product type | Standard throw projector |
| Product color | Black, Silver |
Weight and Dimensions| Weight | 2700 g |
|---|
Connect your computer using the included cable for video output.
Connect video using S-Video or Composite Video, and audio using RCA cable.
Check power, connections, source activation, and press source/auto image.
Press Auto Image or reduce computer resolution/refresh rate.
Turn off, wait, then turn on. Replace lamp if light persists. See Reference Guide.
Turn off, remove obstructions from vents, and let it cool.
Turn off, wait, then turn on. Service if light persists. Visit website.
To Next Page
