How to fix InFocus Projector when only start up screen appears?
If your InFocus Projector only shows the startup screen, try the following: * Press the SOURCE button. * Activate your laptop’s external port. * Restart your laptop.
What to do if InFocus Projector has no computer image, just the words “Signal out of range”?
If your InFocus Projector displays 'Signal out of range' instead of the computer image, you can try the following: * Press the Auto Image button on the remote. * Adjust your computer's refresh rate. * Set a different resolution on your computer, as this may be the cause.
How to fix fuzzy or cropped image on InFocus IN2126x?
To resolve a fuzzy or cropped image on your InFocus Projector, change the computer's 'Resolution' setting to match the projector's resolution.
What to do if only my laptop’s background appears on InFocus IN2126x, not the Desktop icons?
If your InFocus Projector only shows your laptop's background and not the desktop icons, change the Multiple Display setting to "Duplicate these displays".
How to center image on InFocus IN2126x screen?
If the image is not centered on the screen with your InFocus Projector, you can: 1. Move the projector. 2. Adjust its height. 3. Adjust the horizontal or vertical position in the Advanced Menu > Image > PC... menu.
How to fix InFocus IN2126x when there is no start up screen?
If your InFocus Projector shows no startup screen, plug the power cord into the projector and press the Power button.
General| Resolution | XGA (1024 x 768) |
|---|---|
| Projection Technology | DLP |
| Lamp Life | 4000 hours (normal), 6000 hours (eco mode) |
| Zoom Ratio | 1.1x |
| Video Compatibility | NTSC, PAL, SECAM |
| Projection Size | 23 - 300 in |
| Inputs | HDMI, VGA, Composite Video |
| Speakers | 10W |
To Next Page
