21
Using the keypad buttons
Most buttons are described in detail in other sections, but here is an overview of
their functions:
Power–turns the projector on and off (page 8).
Right arrow - When the menu or LightCast is displayed, the right arrow button is
used for na
vigating.
Up arrow/Keystone - When the menu or LightCast is displayed, the up arrow but-
ton is used for navigating. When the menu is not displayed, this button adjusts the
squareness of th
e image (page 9).
Down arrow/Keystone - When the menu or LightCast is displayed, the down
ar
ro
w button is used for navigating. When the menu is not displayed, this button
adjusts the squareness of the image (page 9).
Left arrow - When the menu or LightCast is displayed, the left arrow button is
used f
or na
vigating.
Enter - Activates the selected On-Screen Display (OSD) menu item and selects
hi
ghlighted
items in LightCast.
Menu/Exit - Turns on the On-Screen Display (OSD) menu. Goes back to previous
OSD
men
u, exits and saves menu settings.
Auto - Resynchronizes the projector to the source.
Blank - Displays a solid color or factory logo screen.
Source - Brings up a menu of available sources.
To Next Page
Loading...
Need help?
General
