How to fix a fuzzy or cropped image on InFocus in2124?
To resolve a fuzzy or cropped image on your InFocus Projector, change the computer's "Resolution" setting to match the projector's resolution. For Windows 7, this can be found at Control Panel > Display > Screen Resolution. Note that the exact steps may vary depending on your operating system.
What to do if my InFocus in2124 says 'Signal out of range'?
If your InFocus Projector displays 'Signal out of range', try pressing the Auto Image button on the remote. Additionally, adjust your computer's refresh rate (for Windows 7, go to Control Panel > Display > Screen Resolution > Advanced Settings > Adapter tab; this varies per operating system). You might also need to set a different resolution on your computer.
Why does my InFocus in2124 only show my laptop background?
If your InFocus Projector only displays your laptop's background and not the desktop icons, change the Multiple Display setting to "Duplicate these displays". On Windows 7, this setting can be found under Control Panel > Display > Screen Resolution. The location of this setting may vary depending on your operating system.
What to do if my InFocus Projector has no start up screen?
If your InFocus Projector shows no start-up screen, plug the power cord into the projector and press the power button.
Federal Communications Commission warning statement for device operation.
Statement of compliance with Canadian regulatory standards.
Lists relevant agency approval marks for the product.
Guidelines for safe projector operation, placement, and environmental factors.
Warnings regarding servicing, lamp handling, electrical hazards, and disposal.
Details on the projector's technical specifications and resolutions.
Information on included accessories and the online product registration process.
Description of all available input/output connectors for video, audio, and control.
Tables for determining projector placement based on screen size and distance.
Instructions for connecting computer video sources and power.
Details on connecting audio input and monitor out for computer sources.
Steps to power on the projector and select the input source.
How to activate external display output on laptops for projection.
Adjusting projector height, zoom, focus, and keystone.
Adjusting contrast and brightness via the projector's basic menu.
Details for connecting HDMI, Composite, VGA, Component, and S-Video sources.
Connecting audio for video sources to the projector.
Procedures for turning off the projector and understanding status lights.
Initial steps for resolving common projector setup problems.
Solutions for missing or incomplete projector startup screens.
Resolving signal range errors and display resolution mismatches.
Ensuring laptop desktop icons are displayed correctly on the projected image.
Adjusting computer resolution and projector position for image clarity.
Adjusting keystone and aspect ratio for correct image shape and fit.
Adjusting image sharpness via the menu for optimal clarity.
Correcting upside down or reversed images using menu settings.
Adjusting projected colors to match the source image accurately.
Resolving issues with embedded video playback and projector overheating.
Steps to take when the "Replace Lamp" message appears at startup.
Overview of remote control buttons and their primary functions.
Solutions for common problems encountered with the remote control.
Connecting audio sources to the projector's speakers or audio out port.
Steps to resolve common audio playback issues.
Description of the projector's physical keypad buttons and their operations.
Adjusting computer image settings for best results on screen.
Using features like Custom key and Auto Off Time for presentations.
Adjusting video image settings for optimal display quality.
Configuring projector features like rear projection, language, and power saving.
Introduction to the projector's basic menu options and navigation.
Introduction to the projector's advanced menu options and navigation.
Adjusting aspect ratio, brightness, and contrast for optimal image.
Configuring keystone, presets, sharpness, volume, and ceiling mount.
Configuring 3D playback and adjusting video color parameters.
PC source color space, gamma, and tint adjustments.
PC input white intensity, force wide, phase, and tracking adjustments.
PC screen saver, sync threshold, and video detection options.
Programmed dimming, low power, language, and menu settings.
Configuring PIN protection for unauthorized projector access.
Auto Off Time and High Altitude Mode settings.
DHCP, IP, Subnet Mask, Gateway, DNS, and MAC Address setup.
Accessing projector info, resetting lamp hours, and factory reset.
Steps to enable LAN control and network configuration.
Instructions for different network environments.
How to control the projector using a web browser interface.
Using the Crestron e-Control interface for projector control and adjustments.
Managing network settings and passwords via the Tools page.
Displaying projector information and status on the Info page.
Instructions for cleaning the projector lens and using the security lock.
Important precautions and notes before replacing the projector lamp.
Step-by-step guide for replacing the projector lamp module.
Procedure to reset the lamp hour counter after lamp replacement.
To Next Page
General
