8
Displaying an image
Press the Power button.
The Power LED lights blue, an
d the fans start to run. When the lamp comes on, the start up
screen displays. It can take up to a minute for the image to achieve full brightness.
No start up screen? Get help on page 12.
Turn on your computer or video device.
The image should appear on the projection screen. If it doesn’t, press the
Source button on
the projector’s keypad or remote.
If you are using a VGA cable to connect your computer to the projecto
r:
If using a laptop, make sure its external video port is active.
Many laptops do not automatically turn on their external video port when a projector is
co
nnected. Usually a key combination like FN + F8 or CRT/LCD key turns the external
display on and off. Locate a function key labeled CRT/LCD or a function key with a monitor
symbol. Press FN and the labeled function key simultaneously.
Refer to your laptop's documentation for more information about your
laptop's key combination.
No laptop image? T
ry pressing the Auto Image button on the remote.
Get help on page 12.
turn on computer or
video device
activate laptop’s external port
monitor key or
LCD/CRT key
FN key
press Power button
To Next Page
Loading...
Need help?
General
