InFocus IN5124 User Manual (English)

Other manuals for InFocus IN5124

Quick Start Guide54 pages

Panduan Ringkas42 pages

Network Guide89 pages

Guide39 pages

Questions and Answers:

E
Ethan KleinAug 16, 2025
How to fix InFocus IN5124 Projector Smart Stack not working?
- P
  Paige BurtonAug 16, 2025
  If the Smart Stack feature isn't working, consider these potential causes and solutions: * Ensure both the Main and Sub projectors are receiving AC power. * Verify the RS232 cross cable is correctly connected between the Main and Sub projectors. * Check the STACK menu settings on both the Main and Sub projectors to ensure they are correctly configured. * Examine the signal cable connections, ensuring they are correctly connected and match the port settings in the menu.
L
Lindsey HerreraAug 19, 2025
Why does my InFocus IN5124 ask if I want to turn on the network adapter?
- C
  Cynthia LeeSep 12, 2025
  This screen appears if the selected network adapter isn't valid. To resolve this, select '[Yes]' to activate the adapter and then proceed to section 1.5. (&14)
E
emasonAug 21, 2025
How to superimpose images correctly on InFocus IN5124?
- E
  Eric AdamsAug 22, 2025
  To correctly superimpose images, adjust the ZOOM ring, VERTICAL and HORIZONTAL adjusters, and the FOCUS ring.
K
Kimberly HansenAug 25, 2025
What causes InFocus IN5124 Main and Sub projectors to not synchronize?
- J
  Jennifer MoralesAug 26, 2025
  Synchronization issues between the Main and Sub projectors can occur if the RS232 cable isn't properly connected. Ensure the RS232 cable is correctly connected and restart the Main projector.
R
Rachel WoodsAug 28, 2025
Why InFocus IN5124 Projector images won't superimpose properly?
- E
  erikbryantAug 28, 2025
  If you're having trouble superimposing images, even after fine adjustments, try these steps: * Press the AUTO IMAGE button on the remote or use AUTO IMAGE on both projectors. * Adjust HORIZONTAL POSITION and VERTICAL POSITION on both projectors. * Verify that the RESOLUTION setting in the INPUT menu is the same for both the Main and Sub projectors.
C
Carrie BowenAug 31, 2025
Why STACK menu is not working on InFocus IN5124?
- B
  Brian SanchezAug 31, 2025
  The STACK menu may not function if the projector settings are not set up for a Smart Stack. Check that POWER SAVING MODE in the SETUP menu is ENABLED, COMMUNICATION TYPE under COMMUNICATION in the SERVICE menu is OFF, and STACK LOCK in the SECURITY menu is OFF.
J
jessicalawsonSep 3, 2025
What to do if my InFocus IN5124 says there is no input signal?
- R
  Randy JensenSep 3, 2025
  If your InFocus Projector displays a 'no input signal' message, first, check the signal input connection. Then, verify the status of the signal source to ensure it is properly sending a signal.
J
James EvansSep 5, 2025
What to do if the horizontal or vertical frequency of the input signal is not within the specified range in InFocus Projector?
- V
  veronica33Sep 5, 2025
  If the horizontal or vertical frequency of the input signal is not within the specified range, check both your projector's specifications and the signal source specifications to ensure they are compatible.
K
kevinstevensSep 9, 2025
What to do if the input signal is not supported on InFocus IN5124 Projector?
- S
  Steven PenaSep 9, 2025
  If your InFocus Projector indicates that the input signal is not supported, verify the projector's specifications and the signal source specifications to ensure compatibility.
B
Brittany SingletonSep 12, 2025
What to do if InFocus IN5124 is waiting for an image file?
- S
  Savannah WhiteSep 12, 2025
  If your InFocus Projector is waiting for an image file, check the hardware connection, projector settings, and network-related settings. You can also try reconnecting using the 'Connect button' of the 'LiveViewer'.