74
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
(continued)
RESPONSE LIMIT TIME
Select the time period which the projector should
wait to receive response data from a device
communicating using the NETWORK BRIDGE and
HALF-DUPLEX methods via the
CONTROL
port.
OFF
ó
1s
ó
2s
ó
3s
OFF: Select this mode if the responses from the
device do not need to be monitored. In this mode,
the projector can send data out to the computer
continuously.
1s /2s /3s: Select the time period which the
projector should wait to receive response data
from the device. The projector does not send out
any data from the
CONTROL
port while waiting
for a response.
• This menu is only available when NETWORK
BRIDGE is the selected COMMUNICATION
TYPE and HALF-DUPLEX is the selected
TRANSMISSION METHOD (
73
).
• OFF is the default setting.
SERIAL PORT ECHO
Controls whether the serial port echoes characters.
STACK
Select this to display the STACK menu. For more
information, see the
Instant Stack Guide
.
• When STACK MODE is set to MAIN or SUB,
the items in the COMMUNICATION menu are
unavailable.
(continued on next page)
To Next Page
Loading...
